Capre F Treatment Table

Versatility for physiotherapistses

Main features:

1. Very low minimum height: Electric height adjustment 45 – 92 cm or hydraulic adjustment 49 - 90 cm

2. Stepless arm supports featuring quick adjustment with gas springs (only F5), anatomic upholstery support the arm of the patient

3. Three or five sections

The modifiability, adjustability and silent operation of the sturdy Lojer Capre F improve functionality and enhance the comfort of use. Its multiple height settings, easy-to-use armrests and side supports, and the stepless adjustable extension and flexion angle of the foot section improve the ergonomics and efficiency of the work being carried out.

All Lojer Capre treatment tables have a wide range of upholstery colors and several high-quality upholstery materials to choose from. It is easy to keep the table clean, thanks to its straight surfaces and encased motor.

Check out the feature videos of Lojer Capre F.

Technical standard features:

Safe Working Load (SWL) 210 kg
Stepless head section with gas spring adjustment
Oval shape or U-shape head section
Unique safety feature of arm rests
Hidden 24V safety actuator, downward movement with gravity force only.
Optional safety switch (on/off) for the mains powers
Stepless foot section extension and flexion +70°/ -12°
Width 55, 60, 65 or 75 cm
Oval shaped frame tubing
Variety of accessories available
Warranty: Steel frame is covered for 10 years and the motor for 2 years
Multiple upholstery colors and several high-quality upholstery materials available

TECHNICAL DATA

Table width	55, 60, 65, 75 cm
Overall length	202 cm
Height adjustment range	45..92 cm (electric) or 49..90 cm (hydraulic)
Foot section adjustment range	+70°..-12°
Head support adjustment range	+35°..-90°
Arm support adjustment range (F5)	34 cm
Arm support angle adjustment (F5)	50°
Total weight	95 kg
Safe Working Load (SWL)	210 kg
Electrical system	24V
CE-marked	Yes
Warranty	2/10 years
Country of Manufacture	Finland

ACCESSORIES

TECHNICAL IMAGES

DOWNLOADS

MATERIAL OPTIONS

Future

Featuring a slightly pearlescent finish, the stylish Future is an environmentally friendly and fire safety tested upholstery material in the Lojer upholstery range. Its antibacterial, antimicrobial and mould-proofing properties make Future an ideal material for demanding applications. The material features cutting-edge coating technology that remains on the surface and does not wear out even when cleaned. At the same time it prevents the growth of bacteria (which causes smells and stains), prolonging the service life of the upholstered parts.

This extremely durable material is 3 to 6 times more durable than traditional faux leather materials (Martindale over 300 000 cycles) and highly resistant to deterioration such as cracking, splitting, and loss of flexibility. It is also waterproof and fade-resistant. The surface coating, durability and performance of Future upholstery material has been designed specifically for the healthcare industry, where bacteria, abrasions and stains are particularly challenging. The material is easy to clean and must be cleaned frequently. It fulfills REACH chemicals regulation requirements, which proves a high emphasis level of health and environment protection. Material composition:

Topcoat 81% vinyl
Backing 19% polyester

Colour options Close

Standard: Silver

Standard: Falls

Standard: Tomato

Standard: Beach

Carbon

Space

Pearl

Titanium

Onyx

Saphire

Lagoon

Pistachio

Plum

Sunrise

Technical features Close

Resistant to oil and fat
Antibacterial
Resistant to disinfectants (according to a separate listing)
Waterproof
Resistant to secretions
Flame retardant:

EN 1021-1+2
UNE 23.727-90
NF P 92-503
DIN 4102 B2
ÖNORM B 3825
ÖNORM A 3800
UNI 9175
IMO FTP Part 8
FMVSS 302
FAR 25.853
ECE R118.02
EN 71-2 Part 2

Resistant to abrasion
Lightfast
Antimicrobial
Tear-resistant
Long-lasting
Easy to clean
Environmentally friendly
Fulfills REACH requirements
Fulfills toys norm DIN EN 71-3

Cleaning Close

New coating technology continues to provide its bacteria-fighting protection even after repetitive cleanings. Advanced vinyl protection results in a more hygienic environment because germ counts can be kept down. It offers unsurpassed antifungal protection by resisting gram positive and gram -negative bacteria, filamentous fungi and yeast. Possible stains, leaks or dirt must be cleaned immediately using a mild detergent solution (1:1 neutral liquid detergent and water) or a cleaning agent suitable for vinyl surfaces, a microfibre cloth and/or a soft brush. The material is then rinsed with clean water and the surface is dried. Future upholstery material can be cleaned using disinfectants (according to a separate listing, e.g. Oxivir or Klorilli). Difficult stains – such as blood and urine – can be cleaned using an Isopropyl alcohol and water solution (1:10 ratio). After disinfection the surface must be cleaned with a clean, damp microfibre cloth. Daily cleaning and maintenance

Clean the entire surface using a mixture of 1:1 (neutral pH) and water. Do not use soap or cleaning solutions that contain alcohol, ketones, xylene, acetates or solvents (mineral/ white spirits).
Completely remove excess cleaner with a white, clean, damp cloth.
Dry the surface.

Make-up

Use a straight application of neutral pH soap. Wipe with a clean white cloth or soft brush, rinse with clean water and dry.

Blood, urine, feces

Use a 1:10 mix of Isopropyl alcohol and water. Rinse with clean water and dry.

Do not use!

Lacquers, strong cleaners, detergents, xylene-based solutions, acetone or ketone (MEK). Cause immediate damage and contribute to the deterioration of the material
Steam cleaning (temperature)

Attention!
Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter colours. This phenomenon is increased by humidity and temperature and is irreversible.

Recommended disinfectants Close

Download the recommended disinfectants listing (pdf-file).

Nature

Durable, high quality Nature represents a new generation of environmentally friendly materials. The material is in accordance with the Oeko-Tex standard and therefore does not include any heavy metals or phthalates. Thanks to its biocompatibility (EN ISO 10993-5 + 10) the material is safe for the skin. The new Nature feels very comfortable and warmer on the skin than regular artificial leather. It is especially suitable for medical and physiotherapy products. Material composition:

Approx. 50% Renewable raw materials
Approx. 30% Natural based raw materials
Approx. 20% Raw material based on crude oil

Colour options Close

Night

Sea

Stone

Haze

Sand

Technical features Close

Resistant to disinfectants (according to a separate listing)
Biocombatible
Flame retardant:

EN 1021-1+2
BS5852 IS 0+1

Resistant to secretions
Resistant to abrasion
Tear-resistant
Long-lasting
Lightfast
Easy to clean
Environmentally friendly
Complies with Öko-Tex 100 standard
Fulfills REACH requirements
Conforms to toy safety standard EN 71-3

Cleaning Close

The material should be cleaned regularly using a mild soap-based cleanser and microfiber or cotton cloth. If necessary, a soft brush can also be used. Visible dirt should be removed immediately. The cleaning procedure may need to be repeated. Then, wipe off the rest of the cleaning agent with a damp cloth and lukewarm water. Do not use!