Material Options
More content below the video
Future
Featuring a slightly pearlescent finish, the stylish Future is an environmentally friendly and fire safety tested upholstery material in the Lojer upholstery range. Its antibacterial, antimicrobial and mould-proofing properties make Future an ideal material for demanding applications. The material features cutting-edge coating technology that remains on the surface and does not wear out even when cleaned. At the same time it prevents the growth of bacteria (which causes smells and stains), prolonging the service life of the upholstered parts.
This extremely durable material is 3 to 6 times more durable than traditional faux leather materials (Martindale over 300 000 cycles) and highly resistant to deterioration such as cracking, splitting, and loss of flexibility. It is also waterproof and fade-resistant.
The surface coating, durability and performance of Future upholstery material has been designed specifically for the healthcare industry, where bacteria, abrasions and stains are particularly challenging. The material is easy to clean and must be cleaned frequently. It fulfills REACH chemicals regulation requirements, which proves a high emphasis level of health and environment protection.
Material composition:
- Topcoat 81% vinyl
- Backing 19% polyester

Antibacterial
Resistant to disinfectants (according to a separate listing)
Waterproof
Resistant to secretions
Flame retardant:
- EN 1021-1+2
- UNE 23.727-90
- NF P 92-503
- DIN 4102 B2
- ÖNORM B 3825
- ÖNORM A 3800
- UNI 9175
- IMO FTP Part 8
- FMVSS 302
- FAR 25.853
- ECE R118.02
- EN 71-2 Part 2
Lightfast
Antimicrobial
Tear-resistant
Long-lasting
Easy to clean
Environmentally friendly
Fulfills REACH requirements
Fulfills toys norm DIN EN 71-3
Possible stains, leaks or dirt must be cleaned immediately using a mild detergent solution (1:1 neutral liquid detergent and water) or a cleaning agent suitable for vinyl surfaces, a microfibre cloth and/or a soft brush. The material is then rinsed with clean water and the surface is dried. Future upholstery material can be cleaned using disinfectants (according to a separate listing, e.g. Oxivir or Klorilli). Difficult stains – such as blood and urine – can be cleaned using an Isopropyl alcohol and water solution (1:10 ratio). After disinfection the surface must be cleaned with a clean, damp microfibre cloth.
Daily cleaning and maintenance
- Clean the entire surface using a mixture of 1:1 (neutral pH) and water. Do not use soap or cleaning solutions that contain alcohol, ketones, xylene, acetates or solvents (mineral/ white spirits).
- Completely remove excess cleaner with a white, clean, damp cloth.
- Dry the surface.
- Use a straight application of neutral pH soap. Wipe with a clean white cloth or soft brush, rinse with clean water and dry.
- Use a 1:10 mix of Isopropyl alcohol and water. Rinse with clean water and dry.
- Lacquers, strong cleaners, detergents, xylene-based solutions, acetone or ketone (MEK). Cause immediate damage and contribute to the deterioration of the material
- Steam cleaning (temperature)
Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter colours. This phenomenon is increased by humidity and temperature and is irreversible.
Nature
Material composition:
- Approx. 50% Renewable raw materials
- Approx. 30% Natural based raw materials
- Approx. 20% Raw material based on crude oil

Biocombatible
Flame retardant:
- EN 1021-1+2
- BS5852 IS 0+1
Resistant to abrasion
Tear-resistant
Long-lasting
Lightfast
Easy to clean
Environmentally friendly
Complies with Öko-Tex 100 standard
Fulfills REACH requirements
Conforms to toy safety standard EN 71-3
Do not use!
- Solvents, chlorides, abrasives, chemical cleansers or polishing wax must not be used.
- Chemical cleaning
Colorings caused by jeans or other textiles are excluded from any manufacturer´s guarantee.
Skai Conductive
Material composition:
- Approx. 90% PVC-compound
- Approx. 10% CO/ PES -knitted fabric

Long-lasting
Resistant to abrasion
Lightfast
Tear-resistant
Easy to clean
Electrically conductive
Fulfills REACH requirements
Do not use!
- Lacquers, strong cleaners, detergents, xylene-based solutions, acetone or ketone (MEK). Cause immediate damage and contribute to the deterioration of the material
- Steam cleaning (temperature)
Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter colours. This phenomenon is increased by humidity and temperature and is irreversible.